KPCI-3110 and KPCI-3116 User's Manual
Connecting counter/timer signals
Figure 3-12
shows how to connect a digital output signal (line 0 of digital Bank B, in this case)
to the STP-3110 screw terminal panel.
Figure 3-12
Connecting digital outputs to the STP-3110 screw terminal panel (Line 0, Bank B shown)
Ω
500
+
5V
-
Digital Ground
The KPCI-3110 or KPCI-3116 boards with the STP-3110 screw terminal panel provide user
counter/timers that you can use to perform the following operations:
• Event counting
• Frequency measurement
• Pulse output (rate generation, one-shot, and repetitive one-shot)
This section describes how to connect counter/timer signals to perform these operations. Refer
to
Section
2,
"Functional
Description," for more information on using the counter/timers.
0 Out = LED On
Digital I/O Bank B 0
TB81
STP-3110 Panel
Installation and Configuration
TB97
3-19