Lightmaxx Nano Truss Light Mobile User Manual page 30

Hints:
 The remote control is supplied with the CR2025 battery inserted. To prevent the battery
from being discharged during storage, there is an insulating film between the battery
and the battery contacts. Before using the remote control for the first time, pull the foil
on the back of the remote control out of the battery holder. Otherwise the remote
control will not function.

If the range of the remote control decreases, the battery is exhausted and must be
replaced. To do this, press the small bolt with the notch on the back of the remote
control to the right and pull out the battery holder at the same time.
 A 3 V CR2025 button cell is required to operate the remote control. When inserting,
make sure that the positive terminal of the button cell in the holder is pointing
upwards.
 As a precaution, remove the battery from the remote control when not in use for a long
time.
ENGLISH