Advertisement
This portable lantern contains Li-ion battery.
Please follow user's manual before using it. If any abnormality is found in the product,
please discontinue use and contact the dealer or service center that you purchased.
1. Caution
① Do not use it near high temperature such as fire or heating equipment. It may cause explosion and ignition.
② This product is water resistant. However, if left in the rain for a long time, it may cause malfunction.
If you accidentally fall into the water, please quickly wipe it off
③ Do not store or use in vehicles exposed to direct sunlight. It may cause explosion and malfunction.
④ Do not touch the light source directly as it may become very hot during use. Use handle to carry out.
⑤ Do not use when it exceed the operating temperature range (-10 ° C to 40 ° C).
⑥ Do not use external power other than USB 5V. It may cause heat and ignition.
⑦ Please do not place in the reach of infants. It may cause swallowing of parts or injury.
⑧ Supervisor by guardian is necessary when used by children.
Misuse of lantern may cause injury or electric shock.
⑨ Do not insert any metal parts into the terminal block of the connector.
It may cause heat, explosion or electric shock.
⑩ Do not disassemble or modify the product.
⑪ Do not touch the connector with wet hands. There is a danger of electric shock.
⑫ After use, be sure to turn off the power.
⑬ Dropping or impacting the product can cause damage to the inside of the product,
resulting an unexpected failures in normal use. Be careful not to apply impact to the body.
2. Parts & Contents
① Power button
② Dimming button
③ Function button
(LED Color temperature/SOS Flash)
④ Battery indicator
⑤ LED Light and Diffusion filter
⑥ USB In port
⑦ USB Out port
3. Operating manual
● Charging the lantern
1) As shown in the figure, open the cover of the product and connect the USB cable to the charging port.
Charging time may vary depending on battery capacity and external environment.
⑥
※ Please charge with the supplied USB cable with 5V 2A / 9V 2A / 12V 1.5A smart quick charger.
2) When the product is being charged, the battery level indicator flickers. If the light is not flicking and
all the lights are on, it indicates that the battery has been fully charged
④ Battery indicator
※ When the battery capacity is less than 4%,
Battery check and power bank functions may not work.
● Operate the lantern
1) On/Off & Dimming :
Push on/off button shortly to turn and off the lante
- Stepless Dimming
push and hold
button to increase brightness.Push and hold
※Blinks once when Maximum and Minimum brightness is reached
- 5 Step Dimming
Push
button shortly to increase brightness. Push
2) Battery Check : Press
button once , the battery level is displayed in 4 steps of LED quantity.
3) LED Color change: : When the power is ON, pressing
⑧ Lantern Hook
steps in order of Warm > Bright > Cool
Warm
LED light with low color temperature, warm light feels like ordinary gas lantern
⑨ Metal handle
Bright
LED light with a neutral color of daylight and light bulb and comfortable feeling
Cool
LED light with high color temperature, cool light feels like ordinary fluorescent light
4) SOS-flash: ③Press and hold
button for 2 seconds from ON states to activate the SOS distress signal.
Press
button once again to stop SOS flash
Battery Check
LED Color Change
(Press once->Battery indicator)
(Press once->LED Color change)
Micro 5-pin USB charger that plugs into a
PC or laptop and is compatible with
charging cable for smartphones .
※
When charging
※
When using
Battery indicator
Charging
Battery indicator
Charging
0~25%
0~50%
25~50%
Flickers
50~75%
Flickers
75~100%
50~100%
Fully charged
Stop
Fully charged
Stop
buottn to decrease brightness.
button shortly to decrease brightness.
function button once enables to adjust the color of light in three
SOS-Flash
(Press and hold for 2 seconds->SOS Flash)
● Power bank function
Claymore Ultra+ II model offers smart quick charge.
Connect various devices and lantern with USB cable from ③USB out port and it will automatically start charging.
(On status : Battery indicator turns on)
If power bank is not working, press
or
button once to activate it. (5V charge)
* Charging time may vary depending on battery capacity of
external devices and external environment of the product.
Press once -> Turn on Power bank function
4. How to install the product
● When making the lantern stand up on a flat and even surface
1) You can place the lantern vertically or horizontally
when configuring the lantern on a flat surface
2) Turn the ⑨metal handle to correct angle of lighting and
place on a flat surface to obtain desired lighting direction
● When hanging on a lantern hook or string
1) Turn metal handle to adjust the angle of light in for the desired direction
● When mounting the lantern on camera tripod
1) Unscrew lantern hook from handle,then put the hole of the handle wire into the camera tripod and fix it.
2) Adjust the angle of the handle wire or the direction of the tripod to illuminate the desired spot.
③
Angle
Adjustment
(0˚>45˚>90˚)
Advertisement
