Setting Controls; Touch Control Panel; Temperature Readout Display - Wolf Steamer Use & Care Information Manual

W O L F S T E A M E R M O D U L E
S T E A M E R M O D U L E O P E R AT I O N
S E T T I N G C O N T R O L S
The control panel of your electric steamer
module is illuminated and features touch
controls with graduated control lighting and
temperature display. Refer to the illustrations
below.
To activate the steamer module, first touch the
touch pad on the touch control panel.
The power indicator bar graph will begin to
blink and show a half-power status. To
complete the activation, one of the following
must be done while the bar graph is still
blinking:
Touch the "+" symbol to set the
temperature to 80˚C and complete the acti-
vation.
Touch the "–" symbol to set the
temperature to 80˚C and complete the acti-
vation.
Touch to set the temperature to full
power and complete the activation.
Touch to set the temperature to 60˚C
and complete the activation.
"+" and "–"
symbols
touch pad
touch pad touch pad

Touch control panel

U S E & C A R E
To change the power level setting once the
unit is activated and the bar graph lights are
no longer blinking:
Touch the "+" symbol to increase the
temperature set point.
Touch the "–" symbol to decrease the
temperature set point.
Touch
set point to full power.
Touch
set point to 60˚C.
Touch

Temperature readout display

to increase the temperature
to decrease the temperature
to turn the unit off.
Temperature
display
11