Getting The Most From Your Modmic Uni; Parts List; Troubleshooting Steps - Antlion Audio ModMic Uni Installation

Getting the most from your ModMic Uni

1. The mic is sensitive to plosive blast/wind from
your mouth, especially P's (see Figure C).
2. To lessen unwanted cable torque on the clasp,
fold the cable end of the boom so that it is
close to the clasp (see Figure D).
3. Ensure the mic symbol on the boom is pointed
towards your mouth (see Figure E for detail).
Do you need a little more help?
Here are some common troubleshooting steps that may help you out.
1. Ensure the mute switch is in the unmuted position.
2. Make sure you have the ModMic selected as your default listening device in your recording devices options.
3. Try multiple ports on your computer/device if you're having audio quality issues.
4. If you need additional help contact us at customerservice@antlionaudio.com
5. Some wireless routers may cause interface if close to the mic/cable.

Parts List

One ModMic Uni
C
In-line Carrying case &
mute switch instruction manual
D
One alcohol Two base clasps, one
wipe top clasp with cap &
extra 3M adhesives
E
Microphone Icon
10x
One foam
pop filter