Advertisement
2: Product Description
The face of the E-CODER
information.
3: Wiring Inside Set Version
Follow these steps to run a three-conductor cable
from the E-CODER
1. Connect the three-conductor wire to the encoder
register's terminals as described in the
manufacturer's instructions, using the color code
in step 3. The encoder terminal uses three wires:
black, green, and red.
2. Remove the terminal cover with a flat-head
screwdriver.
Figure 1: E-CODER
®
register to the MIU.
®
contains reading
®
Face Plate
- 4 -
Advertisement
