Set Up Product On Pc - WizCom Technologies Pen Scanner User Manual

WizCom InfoScan™ 1.00 User Guide

Set Up Product on PC

To allow Pen-PC communications (for transferring data from the Pen to the
PC), you must set up your PC.
The set up procedure on the CD-ROM will install the USB driver, install the
WizCom InfoScan Desktop application and establish the Pen-PC
communications.
To run the set up procedure:
1. Insert the WizCom InfoScan CD-ROM into the CD-ROM drive of your
computer.
2. The Main Menu appears.
Note: If the Main Menu does not appear automatically, please do the
following:
a. Click the Windows Start button and select Run.
b. Type x: \setup.exe (where 'x' is your CD-ROM drive letter), then
click OK.
3. Click on the Set Up Product on PC button and follow the online
instructions of the 3 stage setup procedure provided.
Note: You will only have to do this setup once.
10