Starting Procedure: Warm Climate; Starting Procedure: Cold Climate; Stopping Procedure - Bartell Global B424 Owner's Manual

WALK-BEHIND TROWELS
OWNER'S MANUAL

STARTING PROCEDURE: WARM CLIMATE

1. Open fuel valve on gas tank, the fuel valve lever should be in the ON position.
2. Set choke lever to closed position.
3. Throttle should be in fast idle position (Approx 1/3
4. Ensure the on/off switch on the engine is in the ON position. The centrifugal switch on
the handle should be in the run/on position. *Euro version: make sure safety switch is
engaged.
5. Start engine using the recoil start. Lightly pull on starter grip until resistance is felt, then
pull quickly and return grip to starting position.
6. Open choke slightly to prevent flooding.
7. Move choke to "Open" or "Run" position when engine is warm.
8. Using remote throttle lever on the handle increase throttle to maximum operation
position (3600 rpm).

STARTING PROCEDURE: COLD CLIMATE

Follow same procedure as above but allow longer warm-up period – 3 to 5 minutes. In cold
weather, oil is much heavier to move and requires more time to work its way into the moving
parts. If maximum power is not attained, allow further warm-up time.

STOPPING PROCEDURE

1. Throttle engine down to idle.
2. Turn on/off switch to off position.
3. Turn fuel valve lever to off position.
Fill fuel tank with clean gasoline, use safety approved gas containers. DO NOT
MIX OIL WITH GASOLINE – USE UNLEADED GAS ONLY.
rd
throttle)
16
OI – B19001