Advertisement
4.
Pull quick-release knob and turn 90 degrees
into indentation.
6.
Position speaker to desired angle / direction.
8.
Repeat steps for the other side of the WaveRunner
MAINTENANCE:
Periodically, check torque on all hardware. If loose
hardware is found, re-torque to specification.
7/2019
©Yamaha Motor Corporation, U.S.A. All rights reserved.
5.
Put speaker in mount base.
7.
Turn quick-release knob back to original position. Seat
the knob into the indentation. Confirm it is fully
seated and no red color is visible.
CARE AND CLEANING:
.
®
Clean plastic parts with a clean soft cloth and mild soap
and water. Rinse and dry. Always rinse with freshwater
after salt water use.
CUSTOMER SERVICE:
For further information see your Yamaha dealer.
ESTIMATED TIME TO INSTALL: 0.2 HRS
Page 3 of 3
F3X_H81E0_T0_A MANUAL, INSTALL
AUDIO SET
Advertisement
