Advertisement
Quick Links
Advertisement
Related Manuals for NORTH STATES 3-In-1 Arched Décor Metal Superyard
Summary of Contents for NORTH STATES 3-In-1 Arched Décor Metal Superyard
-
Page 2: Part List
2.REGULARLY CHECK THAT ALL FITTINGS ARE SECURELY TIGHTENED AND THAT THE LOCKING MECHANISM IS WORKING PROPERLY. 3.DO NOT USE THE PRODUCT IF ANY COMPONENTS ARE BROKEN OR MISSING. 4.REPLACEMENT PARTS SHOULD ONLY BE OBTAINED FROM NORTH STATES INDUSTRIES. Part list Qty. - Page 3 page 2 GATE PANEL Qty. Parts Name Door panel Release button Left upper corner Right upper corner Door upper hinge Door lower hinge Upper locking housing Lower locking housing Door frame Enclosure Set-up FIGURE 1 POSITION AND ADJUST THE SECTIONS TO A HEXAGON. UNPACK THE FOLDED ENCLOSURE NOTE: THE ARCHED DÉCOR SUPERYARD WITHOUT PRESSING ANY BUTTON.
- Page 4 page 3 FIGURE 2 FIGURE 3 TO CONNECT THE END SECTIONS, VERTICALLY LIFT ONE PANEL ALLOWING THE UPPER AND LOWER HINGE HOUSINGS TO SLIP INTO PLACE IN THE MATING PANEL. TURN SECTIONS TO ALIGN HEXAGONAL MARK WITH ARROW ON OPPOSITE HINGE. See Figure 2 FIGURE 4A FIGURE 4B INSERT THE BAR INTO...
-
Page 5: Operation
page 4 Operation TO OPEN Procedure to open gate: 6A. Press the release button. 6B. Lift the gate panel upward. 6C. Swing gate open. FIGURE 6A TO CLOSE To close the door gate, release it and it will close automatically. Try this action several times and make sure: 7A.The upper lock rod is completely 7B.The lower lock rod of the gate panel... - Page 6 page 5 If the upper locking housing is misaligned toward the left(8D), please loosen the screw on upper locking housing, then press door panel and the upper locking housing together until the two marks are aligned(8E). Make certain the screw is retightened. upper locking door left upper corner...
-
Page 7: Wall Mounting
page 6 Barrier Gate Set-up WALL MOUNTING Wall fittings - A side Wall fittings - B side Wall fittings - A side Wall fittings - B side IN E IN E Socket Cap-E Lower hinge housing Lower hinge holder Floor Spacer-D IN E IN E F L O... -
Page 8: Troubleshooting
CLEANING: Clean the Superyard using warm water and a mild detergent. Use a soft cloth or sponge to avoid scratches. Never use solvents or chemicals to clean the Superyard. North States Industries 1507 92nd Lane N.E., Blaine, MN 55449-4334 763-486-1756 www.northstatesind.com...