General Maintenance; Troubleshooting; Replacement Parts - AquaScape Aquagarden Mini Pond Kit Instructions & Maintenance

General Maintenance

• Remove any debris, algae, or buildup from the AquaGarden.
• Periodically clean the pump's sponge filter by removing the low-suction attachment from the intake and rinsing the sponge in
fresh water. Once removed from the pump, gently pull on the intake of the attachment to separate into two pieces for
complete removal of the sponge.
• If desired, a water change may be conducted 1-2 times per month by removing up to 20% of the water and replacing with
fresh, detoxified water.

Troubleshooting

• Waterfall is not running properly
– Make sure the outlet is receiving power
– Make sure the ground-fault circuit interrupter (GFCI) is not tripped
– Make sure the pump is plugged in and functioning
– Verify that the pump is properly connected to the filter
– Verify there is enough water in the container for the pump to operate
– Clean the sponge filter and low-suction attachment
• Light won't turn on
– Make sure the outlet is receiving power
– Make sure the ground-fault circuit interrupter (GFCI) is not tripped
– Verify that the transformer is functioning properly
• Make sure the quick-connect fitting is fully connected to the transformer

Replacement Parts

AquaGarden Mini Pond Kit Replacement Parts
No. Item number/description
78326 – AquaGarden Mini Pond Pump with
1.
Low Suction
78327 – AquaGarden Mini Pond Light with
2.
Transformer and Rubber Clips
3. 78328 – AquaGarden Mini Pond Clay Grow Media
78329 – AquaGarden Mini Pond Decorative
4.
Mixed Gravel
78330 – AquaGarden Mini Pond Decorative
5.
Mixed Gravel
☎
aquascapeinc.com | CAN (866) 766-3426 |
☎
US (866) 877-6637
1
3
4
2
5
5