Activation; Care And Maintenance - Russell Hobbs 18118 Instructions Manual

d) press and release the T button – the minutes side of the
display will flash
e) press and release the h/min button till the correct minute is
shown
f) leave the controls alone for 5 seconds – the display will settle
at the correct time
, If you don't press the h/min button within 5 seconds, the coffee
maker will revert to "normal", and show the time. Press and
release the T button, and start again.
26 The clock/timer will retain the settings till the coffee maker is
unplugged.
C ACTIVATION
27 You've set the clock, you've set the timer – now you need to
activate it.
28 Check that there's water in the reservoir, and coffee in the filter.
29 If you're making less than 5 cups of coffee, press the Y button,
to turn the brew strength feature on.
30 Press and release the Z button.
31 The Z light will glow, and Z will show on the display.
32 When the set time is reached, the Z light will go off, the X light
will glow, Z will disappear from the display, and brewing will
start.
33 If you want to cancel the timer before brewing has started, press
the Z button.
34 If you want to stop the coffee maker while it's brewing, press the
X button.
35 After it has brewed, the coffee maker will go into keep warm
mode till either:
a) you turn it off by pressing the X button
b) it turns itself off after about 2 hours
C CARE AND MAINTENANCE
1 Unplug the coffee maker and let it cool.
2 Use the grip to open the lid.
3 Tip the contents of the filter into the bin.
6