Wall Mounting Your Soundbar - Alba SR210 Instruction Manual

Using your Soundbar
Let's get started

Wall mounting your Soundbar

You can wall mount your Soundbar. You will need:
• 2 x rawl plugs of a type and size that are suitable for
the wall that you will hang the Soundbar on. 2 rawl
plugs have been supplied but please check that
these are suitable for the wall surface that you will
use.
Fig 8.
• 2 x screws that are the correct size for the rawl
plugs. 2 screws have been supplied which are the
correct size for the rawl plugs provided, but you will
need to check that they will be sufficient for the wall
surface that you will use.
Fig 9.
You will also need to check that the screw heads fit and
hold well into the wall mount points on the back of the
Soundbar.
Notes:
Make sure that the screws and rawl plugs you use are
suitable for supporting the Soundbar.
To avoid damage to the Soundbar and personal injury,
you should get a qualified person to drill the fixing
surface and fit the appropriate wall fixings.
When drilling into walls, always check that there are no
hidden wires or pipes etc.
Before wall mounting your product, check the wall
strength. If this is not clear, then consult relevant
qualified personnel.
Take care not to allow the Soundbar to fall whilst
attempting to hook it onto the screws you have fitted
to hang the product onto.
or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 600 3021.
1. Align the Soundbar in your chosen location and use
a pencil to mark the drilling positions of 16 inches or
406.4 mm apart (Fig 10).
2. Drill the holes as marked in point 1 above.
3. Push 2 rawl plugs into the holes. Insert 2 screws into
the holes and tighten. Take care to leave enough
space between the screw heads and the wall.
406.4 mm (16 inches).
Fig 10.
Note: You will need to ensure that the screws heads
can fit into the wall mount points on the back of
your Soundbar and that they are long enough to
sufficiently grip into the rawl plugs and wall. You
must also leave enough space between the screw
head and the wall for the screw head to fit into the
mounts.
4. Hang the Soundbar onto the screws. For secure
mounting ensure the screw heads slide firmly into
the narrow part of the wall mount fixings on the
back of the Soundbar.
Fig 11.
Standard features 19