Table of Contents
Advertisement
Description and Configuration
1.4.7. The RCN Resistor Network
The components of the RCN resistor network are determined by the type of input signals
generated by the encoder. Figure 1-5 shows the configuration of the headers for common
input signal types.
1.5.
The output sine and cosine pulse trains are interpolated to spread out the pulses evenly
throughout the 1 µs sample period. The output pulse can be clocked at four different
frequencies depending on the input frequency and the pulse width jumper settings. The
output clock can be 4 MHz, 8 MHz, or 16 MHz. The following chart in Figure 1-6 shows
the count spacing over a 1 µs period with the clock set to 16 MHz.
1-8
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Figure 1-6. RCN Resistor Network
Output Pulse Clock Speed
Aerotech, Inc.
MX Multiplier Option Manual
Version 1.3
Advertisement
Table of Contents
