Pulse Width Jumpers (Jp2 & Jp3); Figure 1-4. Mx Multiplier Board Hardware Locations - Aerotech MX Series Option Manual

Description and Configuration
1.4.3. Pulse Width Jumpers (JP2 & JP3)
Table 1-1. Settings for Pulse Width Jumpers (Rev A and Later)
JP2
1
1
1
1
1-4
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
JP3
1
1
1
1
Rev - boards use position 1-2 for jumper "IN" and position 2-3 for jumper "OUT" on
jumpers JP2 and JP3.

Figure 1-4. MX Multiplier Board Hardware Locations

Aerotech, Inc.
MX Multiplier Option Manual
Function
Minimum pulse width = 0.0625 µs (default)
Master clock frequency = 16 MHz (default)
Minimum pulse width = 0.125 µs
Master clock frequency = 8 MHz
Minimum pulse width = 0.25 µs
Master clock frequency = 4 MHz
Minimum pulse width = .5 µs
Master clock frequency = 2 MHz
Version 1.3