Multiplier Signals; Figure 1-2. Mx Multiplier Board Configuration; Figure 1-3. Plot Of Input And Output Signals - Aerotech MX Series Option Manual

Description and Configuration
1.2.
The multiplier board accepts either voltage or current input signals and the resistor
network values are set according to the input signal type. Refer to Section 1.4.7 for the
appropriate values. The outputs are square wave, RS-422 TTL compatible signals. The
input marker signal is expected to be active high and located in the middle of the
electrical cycle. The plots illustrated in Figure 1-3 show the input and output signals
(cosine, sine, and marker) for one electrical cycle of the MX5 multiplier box.

Figure 1-3. Plot of Input and Output Signals

1-2
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Figure 1-2. MX Multiplier Board Configuration

Multiplier Signals

Aerotech, Inc.
MX Multiplier Option Manual
Version 1.3