Halma MEMCO Elite 618 Manual

PRODUCT
INFORMATION
SHEET
Memco Elite
INFRA RED SAFETY CURTAIN FOR LIFTS
Greatly reduces damage to the lift doors
Microcontroller based TX and RX
81 criss-cross beams offer protection up to a height of 1.8m as required by EN81-
70:2003
Supplied with patented Power Reduction software
Designed for new and existing lifts
Diagnostic LEDs and timeout software
Robust 9mm wide profile
4m range
INTRODUCTION
The Memco élite 618 safety system provides
a light curtain of infra-red beams operating
between the lift car doors. Any person or
object breaking the beams will trigger the
system and re-open the doors. The beam
pattern will pick up even small objects
between the car doors.
Fig 1: 618 Beam Pattern
Model 618
The 618 safety system consists of a transmitter
detector (TX) and a receiver detector (RX)
mounted on the car doors. The system will
automatically sense the door separation and
adjust itself for optimum performance. No
setting up is required.
In many installations a separate controller is
unnecessary and the detectors can be
connected direct to the lift controller or door
operator.
ISSUE