Advertisement
SELECTING THE MEASUREMENT INFORMATION TO BE VIEWED ON THE DISPLAY
The measurement values scroll on the N model display. The wanted value can be locked to view continuously by
pressing the S1 button. You resume to the scrolling view by pressing the S1 button again.
A.
S1 button
CALIBRATION
If ABCLogic™ method is not in use, the device should be calibrated every 6-12 months. The recommended calibration
interval is 5 years even if the ABCLogic™ is in use.
TM
ABCLOGIC
self-calibration feature
ABCLogic™ (Automatic Background Calibration Logic) is a patented self-calibration technique. ABCLogic™ method
eliminates the possible long term drift. ABCLogic™ method can be used when the CO
two times within a week to the level of approx. 400 ppm. Therefore the ABCLogic™ is effective in spaces that are not
continuously occupied.
ABCLogic™ can be deactivated in continuously occupied spaces.
Deactivating the ABCLogic™
The ABCLogic™ function can be deactivated by using the ML-SER tool.
Produal Oy
Keltakalliontie 18, 48770 Kotka FINLAND
Tel: +358 10 219 9100 / Fax: +358 5 230 9210
Information is subject to change without prior notice.
USER GUIDE
HDHFL
concentration drops at least
2
info@produal.fi
www.produal.com
8 (8)
Advertisement
