Table of Contents
Advertisement
Installation
There are two installation methods: Wall-Mounted and Floor Stand.
Before Installing
Maintain an adequate air gap between the back of the display and any wall
for proper ventilation.
Ensure there is no direct airflow from air conditioning or heating vents
blowing on the display.
Avoid installing the display in places with high humidity.
Due to high power usage, always use power cords specifically designed for
this product.
Wall Mounting
Installing the Upper and Lower Wall Mounting Brackets
1. Ensure the wall area and size is an appropriate installation site.
NOTE: The height of the Upper Wall Mount Brackets must not be less than 90-
1/2" (2.3 meters) from the ground.
2. Using the Wall Mount Bracket (pictured above) as a guide, mark each of the eight
(8) holes and pre-drill each.
3. Install the first Upper Wall Mount Bracket with the provided screws (M6x50mm
Expansion for masonry; TA6x30mm for load bearing wood).
4. Repeat Step 2, ensuring the second Upper Wall Mount Bracket is level with the
first upper bracket.
1790
mm
1750
mm
1250
mm
750
mm
250
mm
15
7
mm
mm
12
mm
14
Advertisement
Table of Contents
