Verifying The Installation; Indicator Description - Huawei iBattery 3.0 Quick Manual

Hide thumbs Also See for iBattery 3.0:
Table of Contents

Advertisement

7
Appendix
7.1

Verifying the Installation

No.
Check Item
Installation of devices in
1
the iBattery system
Labels of cables to the
POE port, COM port,
2
BCB port, and HALL
current detecting port on
the iBattery system
Connections of cables
to the PoE port, COM
port, BCB port, and
3
HALL current detecting
port on the iBattery
system
4
iBOX DIP switch
Positive and negative
5
iBAT input power cables
6
Operating environment
7.2

Indicator Description

iBOX Indicator Color Meaning
PWR
Green Power indicator Steady on
ALM
Red
RUN
Green
RF_Z
Green
Acceptance Criteria
All devices in the iBattery system are installed
reliably.
All cables for the iBattery system are
connected correctly. Both ends of a cable are
labeled correctly, and the labels provide
concise and understandable cable description.
Cables to the iBattery system have been
connected securely and reliably. For the
cables secured by screws, the spring
washers are flattened. All cable connections
are secure. No open circuits and potential
risks exist on cable connections.
All DIP switches on iBOXs are correctly set.
Check that the voltage between the positive
and negative iBAT input power cables is
correct by using a multimeter.
Conductive dust and other foreign matter are
cleaned up from the installation environment.
Status
Steady on
Alarm indicator
Off
Blinking at long
intervals
Blinking
Northbound
intermittently at
communication
super short intervals
status
Blinking at short
intervals
Steady on
Wireless
Blinking at super
communication
short intervals
status
Blinking at long
intervals
Description
Board power indicator.
The actual number of online devices
is less than the value of iBAT
number.
The actual number of online devices
equals the value of iBAT number.
The communication is normal.
Blinking, lasting for 1 minute.
Communication fails. (No legitimate
northbound data has been received
for 3 minutes.)
No network parameters exist. (A
network is to be created.)
A network is being created (new
nodes allowed).
Data is being transmitted (new
nodes not allowed).
17
Check Result
□ Passed □ Failed
□ Passed □ Failed
□ Passed □ Failed
□ Passed □ Failed
□ Passed □ Failed
□ Passed □ Failed

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

IbatIboxHall

Table of Contents