Advertisement
amount of water, and then close the lid. Alternatively, the
kettle may be filled through the spout. The water level should
not exceed MAX marks or sit below MIN level. Too little
water will cause the kettle switching off before the water has
boiled.
NOTE: Do not fill the water over the maximum level, as
water may spill out of the spout when boiling. Ensure that
the lid is firmly in place before plugging the power outlet.
3. Position the kettle on the power base.
4. Connect the plug into a power outlet. Press down the On/Off
switch, the indicator will light up. Then the kettle will start to
boil the water, once the water has being boiled the On/Off
switch will be off automatically. You can shut off the power
by lifting the On/Off switch at any moment during boiling
water. If you want to boil water again, only press down the
On/Off switch directly to restart the kettle.
NOTE: Ensure that the On/Off switch is free of obstructions
and the lid is firmly closed, the kettle will not turn off if the
switch is constrained or if the lid is opening.
5. Lift the kettle from the power base and then pour the water.
NOTE: Operate carefully when pouring the water from
your kettle as boiling water may result in scald, besides,
don't open the lid while the water in the kettle is hot.
6. The kettle will not re-boil until the On/Off switch is pressed
5
Advertisement
