Page 2
• Patent protected • Color: Black Make sure that the ground where you assemble your RockStand Multiple ® Guitar Rack Stand is absolutely level and stable. Never use the stand on uneven surfaces or on surfaces which will not support its weight equally...
Page 4
Instructions 1. Place the feet (2) on a level and stable floor. Take the rest (1) and use the sheet metal screws (E) to screw it into the appropriate holes on the feet (2). Use the hex key wrench (B) to tighten the screws. 2.
Page 5
(E) and a nut (G) to fix the the rest (4) to the risers (3). Use the wrench (A) and hex key wrench (B) to tighten the nuts. Assembly of the RockStand Multiple Guitar Rack Stand is now complete. ® 4. For storage and easy transport, the RockStand Multiple Guitar Rack ® Stand is collapsible.
Page 6
• Never use the guitar stand as a ladder or support frame for other things! Only place the guitar stand on a level and even surface. Warwick GmbH • & Co. Music Equipment KG is not responsible for any personal and material damages caused by faulty assembly and misuse.
Multiple Guitar Rack Stand - Flat Pack RS 20880 B/1 FP • RS 20881 B/1 FP • RS 20882 B/1 FP Maintenance and Care Use a dry cloth to clean the product. In the case of hard-working screws, use some oil spray or grease. Please regularly check the firmness of the screws and tighten them, if they should have loosened.
Page 8
This product can expose you to chemicals, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more www.p65warnings.ca.go v information, g o to: Warwick GmbH & Co Music Equipment KG, Gewerbepark 46, 08258 Markneukirchen/Germany www.w-distribution.de | info@w-distribution.de...