Charging The Battery - Kaba 1460 Quick Reference Manual

2.2 Symbols displayed on the monitor and symbols used for actuators
The most important of these symbols are explained below.
Symbols Meaning / function
Export menu (configuring actuators)
Import menu (reading from actuators)
Settings menu
USB interface connected
Connect to the programmer
Symbols Actuators
General symbol for actuators
c-lever
c-lever compact
Cylinder
Digital cylinder
Reader
3

Charging the battery

There are two ways to charge the battery. It can be charged via the USB interface with the USB
cable to the PC, or alternatively using the mains adapter.
Charging the battery using the PC
1. Connect the programmer to the PC using the USB cable.
2. The programmer automatically charges the battery if it is connected to the PC.
Charging the battery using the mains adapter
1. Use the USB cable to connect the programmer to the mains adapter.
2. The programmer is charged in the mains socket using the mains adapter.
Kaba programmer 1460 k1evo802en-2013-11
Quick reference guide
3