Related Manuals for Drivecon PWR III Series
Summary of Contents for Drivecon PWR III Series
- Page 1 OPERATION & INSTALLATION MANUAL PWR Series III PUSHBUTTON TRANSMITTERS 820 Lakeside Dr Gurnee, IL 60031 Ph: (847) 855-9150 Fx: (847) 855-9650 www.drivecon.com E-mail: drive.sales@drivecon.com (800) 374-8266...
-
Page 2: Table Of Contents
6.1.- WARRANTY..............................10 6.2.- PRECAUTIONS ..............................10 6.3.- FAULT FINDING..............................11 6.4.- SPARES ................................13 ANNEX A - PROGRAMMING A SPARE TRANSMITTER................14 ANNEX B- STANDARD WIRING DIAGRAMS 820 Lakeside Dr Gurnee, IL 60031 Ph: (847) 855-9150 Fx: (847) 855-9650 www.drivecon.com E-mail: drive.sales@drivecon.com (800) 374-8266... -
Page 3: Declaration Of Conformity
Normes harmonisées utilisées: EN 61000-4-4 EN 60529 Norme armonizate utilizzate: EN 61000-4-5 PrEN 13557 Normas armonizadas utilizadas: EN 61000-4-6 PrEN 12077-1 EN 61000-4-11 820 Lakeside Dr Gurnee, IL 60031 Ph: (847) 855-9150 Fx: (847) 855-9650 www.drivecon.com E-mail: drive.sales@drivecon.com (800) 374-8266... -
Page 4: System Description
750 mAh NiMH Charging temperature 32º to 113ºF (0º to 45ºC) Discharge temperature -4º to 122ºF (-20º to 50ºC) Autonomy 10 h (operating at 50%) 820 Lakeside Dr Gurnee, IL 60031 Ph: (847) 855-9150 Fx: (847) 855-9650 www.drivecon.com E-mail: drive.sales@drivecon.com (800) 374-8266... -
Page 5: Safety Instructions
Identify the machine controlled on the label for this purpose on the transmitter. Service the equipment periodically. When carrying out repairs, only use spare parts supplied by Drivecon, Inc. 3.2.- WHAT YOU MUST NOT DO Never make any changes to the set that have not been approved by manufacturer. -
Page 6: Installation
(keys, coins, etc.). Always keep contacts clean. Never leave batteries in direct sunlight. Only use Drivecon supplied batteries. When the batteries are exhausted they can be disposed of or recycled safely according to local standards. -
Page 7: Receiver
Install the receiver cabinet using 4 elastic absorbers. 820 Lakeside Dr Gurnee, IL 60031 Ph: (847) 855-9150 Fx: (847) 855-9650 www.drivecon.com E-mail: drive.sales@drivecon.com (800) 374-8266... - Page 8 Remember to connect the ground cable. Only use fireproof cables for connections. Select the appropriate voltage on the receiver, (230, 115 or 48 Vac) 820 Lakeside Dr Gurnee, IL 60031 Ph: (847) 855-9150 Fx: (847) 855-9650 www.drivecon.com E-mail: drive.sales@drivecon.com (800) 374-8266...
-
Page 9: Starting Up
1.- Label for crane identification. 2.- LED. 3.- Manoeuvre button. 4.- Contact key. 5.- Start button. 6.- STOP button. 7.- Option: Range Limitation. 820 Lakeside Dr Gurnee, IL 60031 Ph: (847) 855-9150 Fx: (847) 855-9650 www.drivecon.com E-mail: drive.sales@drivecon.com (800) 374-8266... - Page 10 Reconnect the power supply to the motors, move to the usual work position and check to see if all the manoeuvres and the stop button are functioning correctly. 820 Lakeside Dr Gurnee, IL 60031 Ph: (847) 855-9150 Fx: (847) 855-9650 www.drivecon.com E-mail: drive.sales@drivecon.com (800) 374-8266...
-
Page 11: Using The Set
Remember that you are going to remote control a moving piece of machinery. The safety instructions described in chapter 2 of this manual must be strictly adhered to. 820 Lakeside Dr Gurnee, IL 60031 Ph: (847) 855-9150 Fx: (847) 855-9650 www.drivecon.com E-mail: drive.sales@drivecon.com (800) 374-8266... -
Page 12: Maintenance
6.- MAINTENANCE 6.1.- WARRANTY Drivecon guarantees the PWRSIII remote control sets for a period of up to Two years after the date of delivery. This guarantee covers repairs and the replacement of defective pieces at our Technical Service Department. Both the transmitter and receiver will be necessary if any repairs or replacements need to be carried out. -
Page 13: Fault Finding
There are also two LEDs in the received which will describe the status of the CAN-BUS. If the CAN connection is not working, check the status of next LEDs: 820 Lakeside Dr Gurnee, IL 60031 Ph: (847) 855-9150 Fx: (847) 855-9650 www.drivecon.com E-mail: drive.sales@drivecon.com (800) 374-8266... - Page 14 If the transmitter becomes so damaged that a spare has to be arranged, it can be quickly substituted by following the instructions in ANNEX A. 820 Lakeside Dr Gurnee, IL 60031 Ph: (847) 855-9150 Fx: (847) 855-9650 www.drivecon.com E-mail: drive.sales@drivecon.com (800) 374-8266...
-
Page 15: Spares
6 Button Upper Cover PS70/1 714SPIII3731 6 Button Bottom Cover PI70/1 714SPIII3677 10 Button Upper Cover PS70/2 714SPIII3732 10 Button Bottom Cover PI70/2 714SPIII3678 820 Lakeside Dr Gurnee, IL 60031 Ph: (847) 855-9150 Fx: (847) 855-9650 www.drivecon.com E-mail: drive.sales@drivecon.com (800) 374-8266... -
Page 16: Annex A - Programming A Spare Transmitter
Wait for the orange LED to turn off. In case the LED remains in red repeat the process. 5. Press the STOP button. This completes the programming processes. 820 Lakeside Dr Gurnee, IL 60031 Ph: (847) 855-9150 Fx: (847) 855-9650 www.drivecon.com E-mail: drive.sales@drivecon.com (800) 374-8266... -
Page 17: Annex B- Standard Wiring Diagrams
2ND SPEED TROLLEY RIGHT 1ST SPEED TROLLEY LEFT 1ST SPEED TROLLEY 2ND SPEED BRIDGE FORWARD 1ST SPEED BRIDGE REVERSE 1ST SPEED BRIDGE 2ND SPEED 820 Lakeside Dr Gurnee, IL 60031 Ph: (847) 855-9150 Fx: (847) 855-9650 www.drivecon.com E-mail: drive.sales@drivecon.com (800) 374-8266... - Page 18 1ST SPEED TROLLEY LEFT 1ST SPEED TROLLEY 2ND SPEED BRIDGE FORWARD 1ST SPEED BRIDGE REVERSE 1ST SPEED BRIDGE 2ND SPEED SELECT I SELECT II 820 Lakeside Dr Gurnee, IL 60031 Ph: (847) 855-9150 Fx: (847) 855-9650 www.drivecon.com E-mail: drive.sales@drivecon.com (800) 374-8266...
- Page 19 2ND SPEED R8CAN R8CAN AUX HOIST UP 1ST SPEED R8CAN AUX HOIST DOWN 1ST SPEED R8CAN AUX HOIST 2ND SPEED SELECT I SELECT II 820 Lakeside Dr Gurnee, IL 60031 Ph: (847) 855-9150 Fx: (847) 855-9650 www.drivecon.com E-mail: drive.sales@drivecon.com (800) 374-8266...
Need help?
Do you have a question about the PWR III Series and is the answer not in the manual?
Questions and answers