Advertisement
Specifications
IMPORTANT SAFETY INFORMATION
Use Precautions
1. Wear ANSI-approved safety goggles and
heavy-duty work gloves during use.
2. Keep work area clean and well lit.
3. Keep bystanders out of the area during use.
4. Do not use when tired or when under the
influence of alcohol, drugs or medication.
5. This product is not a toy. Do not allow
children to play with or near this item.
6. Use as intended only.
7. Inspect before every use; do not use if
parts are loose or damaged. Do not use
cracked or chipped tap/die.
8. Keep the handles clean, dry, and free
from oil and grease at all times.
9. The flutes on these tools are sharp and
can cut you. Handle with care.
Page 2
Tap & Die Scale
Material
Tap & Die Sizes
For technical questions, please call 1-888-866-5797.
SAE
Carbon Steel
4-36
5/16"-18
6-32
5/16"-24
8-32
3/8"-16
10-24
3/8"-24
10-32
7/16"-14
12-24
7/16"-20
1/4"-20
1/2"-13
1/4"-28
1/2"-20
1/8" NPT pipe tap
10. Do not use any high-speed means, such as a
lathe or drill press, to cut threads with these
Taps and Dies. High-speed use will void the
warranty and may overheat the tool, causing
loss of heat-treatment and premature failure.
11. Taps and Dies are heat-treated,
and not designed to be sharpened. After
considerable use and with corrosion buildup
these tools may lose their cutting edge.
12. Use clamps (sold separately) or other practical ways
to secure and support the workpiece to a stable
platform. Holding the work by hand or against your
body is unstable and may lead to loss of control.
13. Do not apply excessive force on the cutters.
Allow the tool to do the work. Use cutting oil
when tapping or threading hard materials.
14. Maintain product labels and nameplates.
These carry important safety information.
If unreadable or missing, contact
Harbor Freight Tools for a replacement.
Item 62831
Advertisement
