Touchtunes® Operator Setup; First Time Installation/Phone Settings - MERIT INDUSTRIES Megatouch Combo Jukebox Owner's Manual

Table of Contents

Advertisement

COPYRIGHT © 2003 MERIT INDUSTRIES, INC.
TouchTunes® Operator Setup
The following instructions are only to guide
you through the setup procedure. For com-
plete software instructions, see the
TouchTunes® Software Manual.
NOTE: If you are linking more than one
game, you will only need to set up the
TouchTunes® software on one game.
The set up will then be reflected on all
games.

First Time Installation/Phone Settings

30. Plug in and turn on both the internal and
external power switches on the unit.
Keep in mind that while the game will
boot up in approximately one minute,
the jukebox will take several minutes to
load.
CALIBRATE
BUTTON
FIGURE 15 - FRONT VIEW OF JUKEBOX - SETUP BUTTON LOCATION
14
MEGATOUCH COMBO JUKEBOX™ OWNER'S MANUAL
NOTE: It is normal for the subwoofer to
produce 2-5 thumping noises when the
unit is first turned on.
31. When the Calibration Screen appears,
follow the instructions on the screen.
You will then be taken to the Game
Menu.
NOTE: Because the TouchTunes® soft-
ware has not been set up yet, the screen
will display a "Jukebox Error - Check
Diagnostics" message at the bottom of
the screen when turned on for the first
time.
32. Press the SETUP button in the unit (see
Figure 15) to bring up the Main Menu.
SETUP
BUTTON
SUBWOOFER
PM0378-07

Advertisement

Table of Contents
loading

Table of Contents