IEM eConnect Instruction To Use page 25

Manufacturer's EMC guidelines
NOTE 1: The higher frequency range applies to 80 MHz and 800 MHz.
NOTE 2: These guidelines may not apply in all cases. The distribution of electromagnetic variables is influenced
by the absorption and reflection of buildings, objects and people.
EN
The field intensity of stationary transmitters such as base stations of wireless telephones and mobile terrestrial
radios, amateur radio stations, AM and FM radio and TV transmitters cannot be accurately theoretically determined
in advance.
In order to determine the electromagnetic environment in relation to stationary transmitters, a study of the location
should be considered. If the measured field strength at the location where the eConnect is used exceeds the upper
compliance level, the eConnect should be kept under observation to ensure that it functions correctly. If it is
observed to be performing unusually, additional action may be necessary, such as changing the orientation or
location of the eConnect.
Recommended safety distances between portable and mobile HF telecommunication devices and the
eConnect
The eConnect is designed for operation in an electromagnetic environment in which disturbance variables are
controlled. Maintain the minimum distances between portable and mobile telecommunication devices
(transmitters) and the measuring device as specified below, depending on the output of the communication
device.
53