Boil-Dry Protection; Cleaning And Maintenance - BonsenKitchen EK8901 Operation Instructions Manual

Table of Contents

Advertisement

5. Lift the kettle from the power base and then pour the water.
NOTE:
Operate carefully when pouring the water from your kettle as boiling
water may result in scald, besides, don't open the lid while the water in the kettle
is hot.
6. The kettle will not re-boil until the On/Off switch is pressed down again. The
kettle may be stored on the power base when not in use.
NOTE:
Always disconnect the power supply when not use.

BOIL-DRY PROTECTION

Should you accidentally let the kettle operate without water, the boil-dry protection
will automatically switch off the power. If this occurs, allow the kettle to cool
before filling with cold water to reboil.

CLEANING AND MAINTENANCE

Always disconnect the appliance from the power outlet and cool it down
completely before cleaning.
1. Never immerse the kettle, power cord or power base in water, or allow moisture
to contact with these parts.
2. Wipe the appearance of body with a damp cloth or cleaner, never use a
poisonous cleaner.
3. Remember to clean the filter at intervals. For easier cleaning, detach the filter
and then replace it after cleaning.
CAUTION:
clean the outside of the kettle to prevent the gloss loss.
4. When not in use, the power cord can be stored at the bottom of the appliance.
5. When not use or storage, the power cord may be wound under the bottom of
kettle.
Do not use chemical, steel, wooden or abrasive cleaners to
5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents