Table of Contents
Advertisement
BOIL-DRY PROTECTION
Should you accidentally let the kettle operate without water, the boil-dry
protection will automatically switch off the power. If this occurs, allow the kettle
to cool before filling with cold water to re-boil.
CLEANING AND MAINTENANCE
Always disconnect the appliance from the power outlet before cleaning.
1. Never immerse the kettle, power cord or power base in water, or allow moisture
to contact with these parts.
2. Wipe the appearance of body with a mild and damp cloth or cleaner, never use
a poisonous cleaner.
CAUTION: Do not use chemical, steel, wooden or abrasive cleaners to clean the
outside of the kettle to prevent the gloss loss.
3. Remember to clean the filter at intervals. For easier cleaning, detach the filter
and then replace it after cleaning.
4. When not in use, the power cord can be stored at the bottom of the appliance.
REMOVEL OF MINERAL DEPOSITS
Your kettle should be periodically descaled under the mineral deposits in tap
water may form scale at the bottom of the kettle to cause the efficiency of
operation less. You can use the commercially available descaler and follow the
instructions on the package of descaler.
Alternatively, you may follow the instructions as below to use the white vinegar.
1. Fill the kettle with 3 cups of white vinegar, then adding water to the amount
to cover the bottom of kettle completely. Leave the solution in the kettle
overnight.
2. Then discard the mixture in the kettle, filling the kettle with clean water,
boiling and then throw it away. Repeat several times until the odor of vinegar
has been flushed away. Any stains remaining inside the spout can be removed
by rubbing with a damp cloth.
6
Advertisement
Table of Contents
