Before Using Your Kettle; Using Your Electric Kettle - BonsenKitchen EK8901 Operation Instructions Manual

BEFORE USING YOUR KETTLE

If you are using the kettle for the first time, it is recommended that you should
clean your kettle before use by boiling the Max capacity of water once and then
discarding the water. Wipe the surface with damp cloth.
NOTE:
The max capacity of kettle is 1.7L.

USING YOUR ELECTRIC KETTLE

1. Place the unit on the level surface.
2. To fill the kettle, remove it from the power base and open the lid by pressing
the lid release button, fill with the desired amount of water, and then close the
lid. Alternatively, the kettle may be filled through the spout. The water level
should not exceed MAX marks or sit below MIN level. Too little water will cause
the kettle switching off before the water has boiled.
NOTE:
Do not fill the water over the maximum level, as water may spill out
of the spout when boiling. Ensure that the lid is firmly in place before plugging
the power outlet.
3. Position the kettle on the power base.
4. Connect the plug into a power outlet. Press down the
indicator will light up. Then the kettle will start to boil the water, once the water
has being boiled the
the power by lifting the
you want to boil water again, only press down the
restart the kettle.
NOTE:
Ensure that the On/Off switch is free of obstructions and the lid is
firmly closed, the kettle will not turn off if the switch is constrained or if the lid is
opening.
On/Off switch will be off automatically. You can shut off
On/Off switch at any moment during boiling water. If
On/Off switch
4
On/Off switch , the
directly to