OWC Mercury Elite-AL 800 Pro RAID Owner's Manual

Dual drive firewire 800/400 solution
Hide thumbs Also See for Mercury Elite-AL 800 Pro RAID:

Advertisement

Quick Links

To disconnect or unhook your OWC Mercury hard drive, follow these important steps to
properly dismount your drive.
Windows Systems (all versions): If you wish to disconnect your OWC Mercury drive
without shutting down your computer, you need to stop the device with the "Unplug or
Eject Hardware" icon, located on the right side of the system tray. Your drive is now safe to
power off and unhook.
Macintosh Systems (all versions): If you wish to disconnect your OWC Mercury drive
without shutting down your computer, simply drag the OWC Mercury drive icon to the
trash can on the desktop (or, in the dock using Mac OS X). Your drive is now safe to power
off and unhook.

EMC Retrospect Express

To install and use the included EMC Retrospect Express backup software, please insert the
CD and follow the included installation and operation instructions on the CD.

Share your Mac formatted drive with your PC using MacDrive (optional purchase)

After installing MacDrive, your HFS+ Macintosh volume will mount as if the drive were
formatted in a native Windows format. MacDrive allows you to use your OWC Mercury
hard drive on either platform without having to reformat or re-initialize the volume.
We highly recommend this software for anyone that is sharing data in a cross platform
environment.

Reformatting your OWC Mercury Hard Drive

To reformat or re-initialize your OWC Mercury hard drive, visit our tech center for
directions using the OS you wish to format the drive with.
http://eshop.macsales.com/tech_center/index.cfm?page=data_fwhdd.html

Notes for use with older Macintosh systems

If you are using an older Macintosh system, or using a PCI FireWire card to interface with
the OWC Mercury FireWire drive, we recommend using the included Intech Hard Disk
SpeedTools to tune the drive for optimum performance. Transfer errors or corruption can
be avoided by using this software. This is especially recommended if you are NOT using
Mac OS X.
OWC Mercury Elite-AL 800 Pro RAID
Dual Drive FireWire 800/400 Solution
Owner's Manual
OWCMANMAR800
Copyright ®2005-6 Other World Computing All Rights Reserved.
Other World Computing's 2 year Limited Warranty is not transferrable and subject to limitations.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Mercury Elite-AL 800 Pro RAID and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for OWC Mercury Elite-AL 800 Pro RAID

  • Page 1 To disconnect or unhook your OWC Mercury hard drive, follow these important steps to properly dismount your drive. Windows Systems (all versions): If you wish to disconnect your OWC Mercury drive without shutting down your computer, you need to stop the device with the “Unplug or Eject Hardware”...
  • Page 2 Mac OS X - FireWire 400 or 800: - Drivers not required. Proceed to hardware installation. Mac OS 8.6-9.2.2 - FireWire 400: Insert the HDST CD and follow the instructions provided by the installer. You may need to install Apple’s FireWire drivers, see the OWC tech center for details.

Table of Contents