Reversing Door Instruction - Marathon MWC28-DSS Owner's Use And Care Manual

Step by step instructions
Step 1 Place the wine or beverage cooler in an open area allowing
the door (D) to be opened to the maximum angle and free from
obstruction.
Step 2 Use a thin knife (B) or screwdriver to remove the 3 plastic
hole cover caps (A). Keep these caps for step 7.
Step 3 Use a flat-blade screwdriver to open the upper hinge
buckle (F) to see the hinge shaft (E) and then use a flat-blade
screwdriver to pry the hinge shaft (E) and take it out. Then
unscrew the lower hinge in the same way.
C C
D
Door Hinge
C
Step 4 When the upper and lower parts are removed, pull the
door parallel to the outside. The door can be taken out.
Step 5 The upper hinge and lower hinge are also
exchanged at the same time.The right upper hinge is
changed into the left lower hinge. The right lower
hinge is changed into the left upper hinge. Becomes
the lower door hinge, and becomes the upper door
hinge when the right lower door hinge is changed to
the left side;
Step 6 The magnet of the door must be
removed and reinstalled to the other side.
1. Unscrew the alarm magnet (3)
from door (1)
2. Change the magnet (3) position to
magnet fix hole (2)
Glass Door Hinge Shaft
E

Reversing door instruction

F
Hinge Buckle
2 2
1 1 1 1 1 1 1 1
3
A
B
C
E
F
2 2
1 1 1 1 1 1 1 1
3
D
8