Advertisement
Before fitting the SYMBIONIC
full charge.
1/2
1/2
Turn the SYMBIONIC
Function
POWER
ON/OFF
Bench alignment
a) Fit the foot with the selected cover and shoe.
b) Heel height adjustment on bench.
c) Optimize length/alignment of pylon and adaptors.
Function Hold Press Sound
SET
HEEL
HEIGHT
d) The alignment reference line should pass through a sagittal plane bisection
of the socket, the knee center and the posterior 1/3 of the Flex-Foot.
NOTE: If stability modifications are desired after patient assessment; the
1/3
1/3
1/3
reference line can be shifted up to 5 mm anterior or 5 mm posterior to the knee
center.
Static Alignment
a) Select appropriate heel wedge.
b) Check reference line during static alignment and adjust if required.
c) Optimize knee settings in RHEOLOGIC.
d) Ankle calibration.
Function
CALIBRATION
ON/OFF
®
LEG, charge the unit for 2-4 hours to ensure a
LEG on
®
Hold Sound
2 BEEP = ON
3 BEEP = OFF
1 BEEP = Start
1 BEEP = Move
x2
1 BEEP = Complete
Hold Press Sound
2 BEEP =
x9
ON/OFF
Quick Reference Card
Advertisement
Table of Contents
Related Manuals for Össur Bionic Symbionic Leg
Summary of Contents for Össur Bionic Symbionic Leg
- Page 1 Quick Reference Card Before fitting the SYMBIONIC ® LEG, charge the unit for 2-4 hours to ensure a full charge. Turn the SYMBIONIC LEG on ® Hold Sound Function POWER 2 BEEP = ON 3 BEEP = OFF ON/OFF Bench alignment a) Fit the foot with the selected cover and shoe.
- Page 2 Training checklist 1) Train user on level ground. 2) Train user on ramps/stairs. Make sure the user knows how to: 1) Charge the unit and recognize low battery level warning. 2) Turn power ON/OFF and unlock the keypad. 3) Adjust the heel height when changing shoes. Charging and power Insert the charger cable into the charging port on the user interface panel on the knee module.
Need help?
Do you have a question about the Bionic Symbionic Leg and is the answer not in the manual?
Questions and answers