Table of Contents
Advertisement
Trouble Shooting
1) Press OPEN/CLOSE to open the disc tray.
2) Insert the update CD-R disc, label facing up.
3) Press OPEN/CLOSE to close the disc tray.
* It takes about 1~2 minutes to show below message.
Do you want to update drive-firmware?
Version: A23E.SR150/EUR
-> A23E.SR150
Yes
* If you can't see the message above, try to use other new disc instead of current one.
Generally, this caused by disc quality and by disc creating problem.
4) Press the OK button on the remote control (Fig. 4-15).
Now, processing...
Please, do not turn off the power.
5) It takes about 1~2 minutes to finish a update.
The message on the screen will be displayed after finishing a update and the tray will be opened automatically.
And then do not turn off the unit until it goes off automatically.
Drive firmware is successfully
6) After removing the update disc, turn off the unit with power button.
Finally, the Drive Firmware update is ended.
4-46
Drive Update
No
Fig. 4-14
Drive Update
Fig. 4-16
Drive Update
updated.
Fig. 4-17
Fig. 4-15 Remote Control
Atfer checking old and new version, select "Yes" or "No"
with "
" or "
" on the remote control.
* The Version is indicated by "XX.X modelname"
You can see "LOAD" on Front Display.
Samsung Electronics
Advertisement
Table of Contents
