Operating Mode Dmx - Lightmaxx VEGA SILENT PAR Series User Manual

Commissioning:
Make sure everything is plugged in before switching on. Only use high-quality, preferably short cables.
Confi guration of the DMX connector (3 pin):
Resistance 120 ohm // 1/4 W between pin 2 /DMX-) and pin 3 (DMX+) of the last fi xture.

Operating mode DMX:

Connect the DMX input of your device to the DMX output of your DMX controller, your DMX soft-
ware or the DMX output of a device already in your DMX line. Always use a DMX cable with a 110
Ohm resistor for this connection. Address the device according to your DMX confi guration. The
following table shows the respective DMX modes of the individual devices with the corresponding
values and functions:
VEGA Silent PAR I/II/Quad (8 channel mode/9 channel mode)
Channel Value
1 0-255
2 0-255
3
0-255
4 0-255
5 0-255
6
0-255
7
0-255
8 0-255
9 * 0-255
* only with VEGA Silent PAR I / II Complete
Function
Dimmer
Strobe
Macro
Macro Speed
Red Dimmer
Green Dimmer
Blue Dimmer
White Dimmer
Amber Dimmer