Table of Contents
Advertisement
Program Cooling Temperatures
CAUTION
!
If outside temperature is below 50 F, we
recommend that you remove the thermo-
stat from the wall before proceeding with
the following steps to program cooling
temperatures. Personal injury or prop-
erty damage may occur due to air condi-
tioner compressor slugging. A fresh 9
®
volt Energizer
alkaline battery must be
installed to perform off-wall program-
ming. Programming away from the wall
should prevent accidental compressor
operation. BE SURE SYSTEM SWITCH
IS SET TO OFF POSITION BEFORE RE-
ATTACHING THE THERMOSTAT TO THE
SUBBASE!
1. To program cooling temperatures for the
heating/cooling periods you have already
SYSTEM
set, press
SWITCH
VIEW
2. Press
once. The Monday heating/
PRGM
cooling period 1 start time you just pro-
grammed will appear, and the currently pro-
grammed cooling temperature (A, B, C, or
D) will be displayed.
3. Press
or
B, C, or D temperature you want for Monday's
heating/cooling period 1.
VIEW
4. Press
, then press
PRGM
select Monday's COOL A, B, C, or D tem-
perature for period 2.
5. Repeat steps 3 and 4 for Monday's heating/
cooling periods 3 and 4.
until COOL appears.
to display the COOL A,
or
to
29
Advertisement
Table of Contents
