White Rodgers 1F94-71 Operation Manual page 21

To operate properly in the AUTO mode, there
must be a minimum 1 F separation between
the highest heat temperature and the lowest
cool temperature (see diagram below).
79
COOLING TEMPERATURES
78
77
76 DEAD BAND 1°F
75
74 HEATING TEMPERATURES
73
2. Determine the time periods during which
you will program the temperatures you have
just selected. You must program 4 periods
for each day (periods 1, 2, 3 & 4). However,
you may use the same heating and cooling
temperatures for consecutive time periods.
NOTE
Also keep in mind that, for any given day,
you can only program one set of times for
both heating and cooling (for example, if you
select 5:00 AM to begin heating period 1 on
Monday, then your cooling period 1 for
Monday will also begin at 5:00 AM). How-
ever, you may choose different time periods
for each day separately (for example, heat-
ing/cooling period 1 on Monday may begin
at 5:00 AM, but heating/cooling period 1 on
Saturday may begin at 9:00 AM). Use the
following table to plan your program time
periods, and the temperatures you want
during each period. You may also want to
look at the sample program table to get an
idea of how the thermostat can be pro-
grammed.
21