Table of Contents
Advertisement
02
ADJUSTING SEAT SETTINGS
To adjust lumbar support, side bolsters, seat length extension and mas-
sage settings, use the multifunction control on the side of the seat. Set-
tings made using the multifunction control are shown in the control
panel. The display only shows the settings for one seat at a time.
1. Fold up the control panel.
2. Activate seat adjustment by turning or pressing the multifunction
control in any direction. The seat setting view will open in the control
panel.
3. Select the desired function in the control panel by tapping the dis-
play or turning the multifunction control upward/downward.
4. Change setting by pressing the control in any direction.
Massage
Tap the button on the screen or select the function using the
multifunction control to activate the massage function. The
massage function cannot be used when the ignition is
switched off.
The following massage settings are available:
On/Off:
Select on or off to switch on/switch off the massage function.
Programs 1-5:
There are five preset massage programs. Choose between 1
(Swell), 2 (Tread), 3 (Advanced), 4 (Lumbar) and 5 (Shoulder).
Intensity:
Choose between low, normal and high.
Speed:
Choose between slow, normal and fast.
Advertisement
Table of Contents
