Page 3
This Thin Client Mount can be installed as following three methods. ...
Page 4
Install with VESA mount Step 1 Attach Rubber Pads as shown. Step 2 Attach Bracket B shown to a VESA mount. : ...
Page 5
Install with VESA mount Step 3 Attach Bracket A to a monitor. : Step 4 Attach Plastic Knobs. Step 5 Attach Thin Client. ...
Page 6
Install with VESA mount Secure Thin Client. Step 6 If you are using the strap and buckle, clip buckele together and Step 7 tighten strap. ...
Page 7
Install on 35-42mm pole Attach Rubber Pads as shown. Step 1 a & b1. a & b2. 35-38mm 40-42mm Step 2 ...
Page 8
Install on 35-42mm pole Step 3 If you want to use the optional strap and buckle. Step 4 ...
Page 9
Install under desktop Step 1 Attach Rubber Pads as shown. Step 2 Attach Bracket A as shown. : ...
Page 10
Install under desktop Step 3 Attach Bracket B. Step 4 Attach Thin Client. ...
Page 11
Install under desktop Secure Thin Client. Step 5 If you are using the optional strap and buckle: Step 6 ...
Need help?
Do you have a question about the TCM-01 and is the answer not in the manual?
Questions and answers