Mooer Micro Series Owner's Manual

Digital Delay Pedal
Main Features
Ÿ 3 Delay Modes: Analog/Real Echo/Tape Echo
Ÿ
Full metal shell
Ÿ
Very small and exquisite
Ÿ True bypass
Ÿ DC 9V Adapter power supply
Analog: Simulates a warm and smooth echo sound created by
classic analog delay equipment.
Real Echo: Simulates a natural echo sound in real environment.
Tape Echo: Simulates the sweet and spacy echo sound from a
vintage tape echo machine.
3
6
7 8
9
4
5
6. Mode Switch:
Switch between Analog mode, Real Echo mode and Tape Echo mode.
7. E.LEVEL Knob: Adjust the level of delay effects.
8. F.BACK Knob: Adjust the feedback of delay effects.
9. TIME Knob: Adjust the delay time.
Delay Modes: 3 (Analog, Real Echo, Tape Echo)
Delay Time: 5ms-780ms
Input: 1/4" monaural jack (impedance: 470k Ohms)
Output: 1/4" monaural jack (impedance: 100 Ohms)
Power Requirements: AC adapter 9V DC (center minus plug)
Current Draw: 128 mA
Dimensions: 93.5mm (D) × 42mm (W) × 52mm (H)
Weight:160g
Accessories: Owner's Manual
* Disclaimer: Any specification's update won't be amended in this manual.
1. TRUE BYPASS Footswitch:
Push down the footswitch
to switch between effects
and bypass status.
2. ON/OFF LED:
Instructs effects or bypass
status of REECHO, when
the LED is lit up, the effects
is on.
3. DC IN Power Jack:
For power supply, use a 9-volt
DC regulated AC adapter(plug
polarity is positive on the barrel
and negative in the center).
4. INPUT Jack:
1/4" mono audio jack, for
connecting guitar.
5. OUTPUT Jack:
1/4" mono audio jack, outputs
the signal.