Terms And Window Designation; Context Menu - mru 400DH User Manual

8 / 14
USER MANUAL 400DH

3.2. Terms and window designation

function
1 Connect probe!
2 SN
3 Warm-up time
4 Numeric value
5 Function bar

3.3. Context menu

Depending on the sensor type used, different functions are offered in the context
menu:
function
Signal ON (Key F1)
Signal OFF (Key F1)
Zero point (Key F2)
Max = 0 (Key F3)
Reset
Setting
Printout (Dr)
Measurement menu
(ESC)
Info
choice
( >>) "Arrows right"
choice
( <<) "Arrows left"
explanation
In case of a communication error, check that the probe
is connected to the device via AUX connector and that
an interchangeable sensor is correctly plugged in.
The serial number of the mounted sensor is displayed.
Depending on the sensor, a certain time is required to
warm up the sensor to the required operating temper-
ature.
Display of the elapsed warm-up time
Displays the functions available for the sensor used
explanation
If the sensor has a signal threshold, signal ON appears
in the context menu and on the display (Key F1).
With this function the signal is switched on.
If the sensor has a signal threshold, signal ON appears
in the context menu and on the display (F1).
This function turns off the signal.
This function is sensor dependent.
With this function the sensor is zeroed.
The value Max is set to zero.
This function resets the graphic.
Depending on the sensor, the units and Signal thresh-
olds are set.
Printout is generated, a printer is required for this
function.
Exit measuring program
The information (sensor name, serial number, firmware
version) about the sensor is displayed here.
Varies by sensor
e.g. HC402:
Switching between CH4, C3H8 and H2
MRU GmbH, D-74172 Neckarsulm