Description; The Hand Detector Probe 400Dh - mru 400DH User Manual

USER MANUAL 400DH
3

Description

3.1. The hand detector probe 400DH

The detector hand probe 400DH must be connected to an MRU measuring device
(e.g. OPTIMA7) via the AUX plug.
The red markings of the socket on the measuring device and the plug on the detec-
tor hand probe 400DH must match.
Select the menu item "400DH (ext. probe)" in the measuring device.
...
"Connect sensor!" is displayed
The hand detector probe 400DH alone does not support measurement.
Each measurement function is implemented via the sensor to be plugged in.
In this operating manual only the hand detector probe 400DH with the available in-
terchangeable sensors is covered.
Please read the operating instructions for the basic operation of the measuring in-
strument.
The sensors are automatically recognized and can be easily operated.
7 / 14
MRU GmbH, D-74172 Neckarsulm