Korg 2Ch 1Bit Audio Driver Control Panel Settings - Korg DS-DAC-10R Owner's Manual

KORG 2ch 1bit Audio Driver Control Panel settings

The Mac version of the control panel does not allow you to directly change the Sample
Rate. You can make these changes via AudioGate or from the Audio MIDI settings of
your Mac.
In the Windows start menu Control Panel, view all control panel items, and click "KORG
2ch 1bit Audio Driver" DS-DAC Audio I/O Driver Control Panel to open it; the following
control panel appears:
Buffer Size
Selects the buffer size. Moving the slider toward the left decreases the buffer size, and
moving it toward the right increases the size.
* Increasing the buffer size increases the time difference (latency) between the direct
sound and the monitored sound, but allows you to record safely without noise oc-
curring.
Normally, including while recording vinyl records, you should leave this at the
maximum setting. Only if you are bothered by latency, such as when making a live
recording, adjust the buffer size without allowing noise to occur.
Sampling Rate
Specifies the sampling rate. Choose from 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4
kHz, 192 kHz. If you're using the DS-DAC-10R with WDM (WASAPI/Direct Sound),
make the setting here.
7