Transmitter Solutions SEL 2641 R433-Z4 Manual Installation

You are recommended to read carefully this manual before installing the product.
1 - DESCRIPTION
1A - Introduction
The receiver type SEL2641 R433-Z4 is , designed for the
control of automatic closing systems and anti-burglar
systems, thanks to its very high security coding system
(KeeLoq ® Hopping code).
The operating frequency is among the European
harmonised frequencies; the product fully complies with the
EMC European Regulations (CE).
The code sent by the transmitter changes at every activation,
avoiding any scanning and copying risk.
A special algorithm allows to keep synchronized transmitter
and receiver.
4 RELAY
EXTERNAL MINI RECEIVER
Thank you for choosing this product.
S E L 2 6 4 1 R 4 3 3 - Z 4
The receiver has 4 output relays ( with 3 x NO and 1x
NO/NC contacts, and can be connected to many types of
mechanics ( gate, garage door, rolling shutters, awnings,
anti-burglar appliances, lighting, etc.).
All the receivers of the range can store into the EEPROM a
serial number, a manufacturer key and a synchronism
algorithm of more transmitters.
The programming can be done in self-learning mode by
means of one button.
The housing protection of IP65 allows external installations.
The appliance full complies with the European Regulations
89/336/EEC, 73/23/EEC ,EN 60336-1 and FCC Part 15.