Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Aqua One MariSys 240
Summary of Contents for Aqua One MariSys 240
- Page 1 MariSys 240 Complete step by step instruction booklet...
-
Page 2: Important Safeguards
Important Safeguards This appliance is not intended for use by Never yank the cord to pull it from the outlet. Grasp children or infirm persons without supervi- the plug and unplug to disconnect. sion. Young children should be supervised to ensure that they do not play with the 5. -
Page 3: Before First Use / Preparation
Use Aqua One Genuine Spare Parts Only. reference. Your attention is drawn particularly to See your local Aqua One Dealer and look sections concerning “IMPORTANT for the number listed below for the spare SAFEGUARDS”... - Page 4 Recommended Filter Media Set Up MariSys Drip Tray Wool (x 3) Activated Carbon Bio Balls Activated Carbon Pillow CeramiSub Please Note: This filter media set up above is a guide. For more information regarding filter media please consult your Aqua One specialist.
- Page 5 1. MariSys Complete System. (Diagram 1) 13. Water In 16. Water Out (Return to Aquarium) 14. V-Joint 15. Water Bridge Duck Bill Outlet 12. Priming Pump 8. Overflow Box 27. Priming Chamber 17. Water out (To Marisys) 17. Water return (Back to Aquarium) 22.
- Page 6 2. MariSys. (Diagram 2) Water In (From Overflow Box) Water Return (To Overflow Box) 3. Drip Tray Waste Out Media Basket 1 (3 x wool & 1 x Carbon Pad) 23. Protein Skimmer Collection Cup Media Basket 2 (Bio Balls) 7.
-
Page 7: Set Up Instructions
Set Up Instructions Setting up the Filter Media 4. Remove the Power Head / Protein Skimmer Housing (6) from the Filter Box. For the following section refer to Diagrams 1 & Please Note: This may be a tight fit. 2 on pages 3,5 & 6 of this instruction booklet. 5. - Page 8 Set Up Instructions The aquarium’s water level can also be raised Setting up the Protein Skimmer or lowered by adjusting the Water Level For the following section refer to Diagrams 1 & Adjuster. (10) Raising the tube will cause the 2 on pages 5 &...
- Page 9 Set Up Instructions 5. When the aquarium is newly set up, it may 3. Remove the Media Access Lid from the take a couple of days for the Protein Skimmer MariSys and fill the unit with water until it is to begin producing waste.
-
Page 10: Maintenance
Impeller. Ensure there is not soap or other residue 7. Use an Aqua One Double Ended Pipe Brush around the sink area. to clean the Impeller Well thoroughly. (Where 3. Take the Media Basket to the sink and... - Page 11 Cleaning your Power Head Inlet Elbow Impeller Cover Lock Impeller Cover O-ring Rubber End Cap Impeller Blades Impeller Ceramic Shaft Outlet Base Motor...
- Page 12 Head is plugged in. on the MariSys and Overflow Box and clean 2. No water in Filter Box, add water to connectors thoroughly with an Aqua One Maximum Water level indicator. Double Ended Pipe Brush. Reconnect and 3. Check Overflow Box to confirm water is tighten hose clamps snugly.
- Page 13 Trouble Shooting LARGE AMOUNTS OF 2. No water in Overflow Box, add water. BUBBLES AND WATER ARE 3. Check Overflow Box for obstacles. BEING PROPELLED INTO THE 4. Check Hosing and Tubing for kinks or COLLECTION CUP obstructions. 1. Reduce air supply to Skimmer by adjusting PRIMING PUMP NOT Air Control Valve.
-
Page 14: Specifications
No 31, 3/F Thriving Industrial Centre 26-38 Sha Tsui Road, Tsuen Wan, Hong Kong. Distributed in the UK by: Kong’s (UK) Limited, C/O Aqua Pacific UK Ltd. PO Box 268 Romsey Hampshire SO51 0WW United Kingdom. www.aquaone.com.au ® Aqua One and Kong’s are registered trademarks. - Page 15 Instruction Version 30/10/06...
Need help?
Do you have a question about the MariSys 240 and is the answer not in the manual?
Questions and answers