Adjusting The Ax-Adgm04 - Axxess AX-ADGM04 Installation Instructions Manual

Gm data interface 2012-2016
Table of Contents

Advertisement

Audio level adjustment (digital amplified models only):
• With the vehicle and radio turned on, turn the volume up 3/4 of the way.
• With a small flat-blade screwdriver, adjust the potentiometer clockwise to raise the audio
level; counterclockwise to lower the audio level.
• Once at a desired level, audio level adjustment is complete.
Chime level adjustment:
• With the vehicle on, turn it off and leave the keys in ignition. Open the driver's door; chimes
will be heard.
• Wait 10 seconds, and then with a small screwdriver, turn the potentiometer clockwise to
raise the chime level; counterclockwise to lower the chime level.
• When the chime is at a desired level, remove the keys from the ignition. This will lock the
chime volume at its current level.
8

ADJUSTING THE AX-ADGM04

OnStar level adjustment:
• Press the OnStar button to activate it.
• While OnStar is speaking, press the VOLUME UP or VOLUME DOWN button on the steering
• If the vehicle does not come equipped with steering wheel controls, locate the Black/Yellow
• While OnStar is speaking, tap the Black/Yellow wire to ground. Once the OnStar level is set,
wheel to raise or lower the OnStar level.
wire on the AX-ADGM04 harness.
it will stay at that level until the Black/Yellow wire is tapped to ground again.

Advertisement

Table of Contents
loading

Table of Contents