Table of Contents
Advertisement
Quick Links
1
CHARGING PROCEDURE
Connect the battery charger to the power supply
and the indicator light should turn to green. Then,
slide the charger base on
the battery pack to make connections and the
indicator light will turn red to show that the
charging has started. It will remain
red until the battery is fully charged.
2
INSTALLING THE BATTERY PACK
1
2
Installing the battery pack
Removing the battery pack
20
HT19-401-003-15
VOLT
2 in 1: Portable Power Cleaner/
Water Sprayer
3
ASSEMBLY
2
Attaching extension lance to the power
nozzle.
When attaching, align the two projec-
tions on the lance with the grooves of
the power nozzle.
MAX
1
Advertisement
Table of Contents
Related Manuals for Hyper Tough 20 Volt MAX HT19-401-003-15
Summary of Contents for Hyper Tough 20 Volt MAX HT19-401-003-15
- Page 1 HT19-401-003-15 VOLT 2 in 1: Portable Power Cleaner/ Water Sprayer CHARGING PROCEDURE INSTALLING THE BATTERY PACK ASSEMBLY Connect the battery charger to the power supply Installing the battery pack Attaching extension lance to the power and the indicator light should turn to green. Then, Removing the battery pack nozzle.
- Page 2 HT19-401-003-15 VOLT 2 in 1: Portable Power Cleaner/ Water Sprayer ASSEMBLY ASSEMBLY 0PERATION Choose a suitable nozzle pattern according Attaching the multi-spray nozzle. Attaching the hose to the power to your work. Spray When attaching, gently pulling the nozzle patterns 0 , 15 , 25 and 40...
Need help?
Do you have a question about the 20 Volt MAX HT19-401-003-15 and is the answer not in the manual?
Questions and answers