Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for AIS Fibre HUMAX ONT
Summary of Contents for AIS Fibre HUMAX ONT
- Page 1 HUMAX (ONT) Installation Strictly Confidential...
- Page 2 LED Status indicator Description Front Device is off/No have electric current POWER Green LED Normal status OLT does not connect to HUMAX Green LED The connection between OLT and HUMAX CONNECTION is registered Green LED The connection between OLT and HUMAX blink is not registered Normal status...
- Page 3 System Connection Back Description Port Information Connect LAN with HUMAX LAN Port and WAN Port(Blue Port) of On (I) / Off (0) On/OFF DC 12 Volt with HUMAX On/Off PWR Port LAN Port wire Fiber cable Plug fiber cable HUMAX Fiber Port Strictly Confidential...
- Page 4 Overview of HUMAX Connection Electric Cable WAN port (Blue) VDSL CPE Fiber Cable 192.168.1.1 192.168.1.254 Humax ONT(SFU) LAN Port1 (Yellow) Note: The system connection in this page has to set before DHCP start an activation PC Staff LED at Power/Internet/WAN/LAN1/WLAN on and hold Blink Strictly Confidential...
- Page 5 Activation Click HP11X.exe and press Enter Strictly Confidential...
- Page 6 Application Details ① Connect : Connection button to login with IP that showed on ONT IP Address (192.168.1.254) ② Disconnect : Disconnect with HUMAX ③ Get Password : See current password (Activation number) that was set to HUMAX ④ Set Password : Set new password This button can use after enter a correct activation number in 8 already ⑤...
- Page 7 Step 1 1. Click Connect - After start a program, the window will be displayed. Click Connect - Program will display a message “Succeeded to connect the device” if a connection is successfully Blink Strictly Confidential...
- Page 8 Step 1 (Continue) 1. Click Connect - In another way, the message “Couldn’t connect to the device” will be displayed if the device cannot connect Blink Strictly Confidential...
- Page 9 Step 2 2. Click - Click on ”Retrieve Optical Rx/Tx Power” to measure RX/TX Power - Program will send message “Succeeded to retrieve Rx/Tx” - Record Rx/Tx Blink Strictly Confidential...
- Page 10 Step 3 2. Click - Click ”Get Password” an old password of ONT will display in ONT Password Change ONT Password by enter Activation number of customer - Press ”Set Password” then the background of a message “Succeeded to connect the device” will change to green 3.Enter Customer’s activation number 4.
- Page 11 Step 4 Turn off HUMAX then turn on again - If activation number is correct the LED status will display like a figure below - If activation number is wrong, Check an activation number then do a step 3 again Successful On/Blink Strictly Confidential...
- Page 12 Registration Strictly Confidential...
- Page 13 Step 1 - Launch browser, it will redirect to registration page automatically - If the page is not showed, go to network.ais.co.th/?cond=registration&accesstype=VDSL Strictly Confidential...
- Page 14 Step 2 - Enter last 4-digits of activation number then press Submit - Enter Keyword of company then press Submit Strictly Confidential...
- Page 15 Step 3 - The page will display as figure below, that means a registration is successful Strictly Confidential...
- Page 16 The steps to retrieve Rx/Tx after installation Strictly Confidential...
- Page 17 Step 1 1. Click - If HP11X.exe was closed when the installation finished, it will cannot connect to HUMAX when start HP11X.exe again - A program will show message “Couldn’t connect to the device” Strictly Confidential...
- Page 18 Step 2 - Change LAN connection of VDSL CPE from WAN port (blue) to LAN Port 2 (yellow) LAN Port2 WAN Port (blue) (yellow) Electric cable Electric Cable Fiber cable VDSL CPE Fiber cable VDSL CPE 192.168.1.1 192.168.1.1 192.168.1.254 192.168.1.254 LAN Port1 Humax Humax...
- Page 19 Step 3 1. Click - Click Connect - Click “Retrieve Optical Rx/Tx Power” - Record 2. Click Strictly Confidential...
- Page 20 Step 4 - Change LAN connection back LAN Port2 (yellow) WAN Port (blue) Electric cable Electric cable Fiber cable VDSL CPE Fiber cable VDSL CPE 192.168.1.1 192.168.1.1 192.168.1.254 192.168.1.254 Humax LAN Port1 Humax LAN Port1 ONT(SFU) (yellow) ONT(SFU) (yellow) DHCP DHCP Staff Staff...
- Page 21 Steps of LED indicator of Normal HUMAX...
- Page 22 Power On Strictly Confidential...
- Page 23 ETH On Strictly Confidential...
- Page 24 Connection On Strictly Confidential...
- Page 25 Appendix...
- Page 26 Appendix 1 Connect Electric and Fiber cables to HUMAX Press On button, Green LED at POWER will on and hold Fiber cable On(I)/Off(O) Electric cable Strictly Confidential...
- Page 27 Appendix 1 (Continue) For a moment, LED at connection will blink If LED at connection still off and Red LED at Alarm is on and holding, that means the connection of fiber cable is abnormal Strictly Confidential...
- Page 28 Appendix 2 Connect LAN with HUMAX then green LED at ETH will blink Strictly Confidential...
- Page 29 Appendix 2 (Continue) If it has some issue with fiber cable, red LED at Alarm will on and hold Strictly Confidential...
Need help?
Do you have a question about the Fibre HUMAX ONT and is the answer not in the manual?
Questions and answers