Subscribe to Our Youtube Channel
Related Manuals for Optimum DRO 5
Summary of Contents for Optimum DRO 5
- Page 1 OPTIMUM M A S C H I N E N - G E R M A N Y Betriebsanleitung - de Operating manual - en Version 1.0.4 Dreiachs- Positionsanzeige Three-axes position display DRO 5 Artikel Nr. Item no. 3383975...
- Page 2 Dear customer, Thank you very much for purchasing a product made by OPTIMUM. OPTIMUM digital displays offer a maximum of quality, technically optimum solutions and convince by an outstanding price performance ratio. Continuous enhancements and product innovations guarantee state- of-the-art products and safety at any time.
- Page 3 configuration tasks; are authorized to commission, earth and label circuits and devices/systems in accordance with the- safety standards. DRO 5 Version 1.0.4 dated 2015-11-19 Original operating instructions Page 17...
- Page 4 Device dimension: height 134mm, width 98.5mm, depth 65.5mm Electrical installation WARNING! Destruction of parts of equipment and loss of regulation control Check all line connections and plug connections before switching on supply voltage. DRO 5 Page 18 Original operating instructions Version 1.0.4 dated 2015-11-19...
- Page 5 Power is supplied via the rear jack plug . Connect the sensor for speed measurement from the scope of delivery with the electronic display. 3.2.2 Pin assignment magnetic sensor Connect the sensors with electronic display. DRO 5 Version 1.0.4 dated 2015-11-19 Original operating instructions Page 19...
- Page 6 Speed mode setting Basic value setting Keyboard (eight keys) The selection keys of axes Function selection key, enter key. Moving key Increase or decrease key of the digits DRO 5 Page 20 Original operating instructions Version 1.0.4 dated 2015-11-19...
- Page 7 Selection of decimal places, 2 or 3 decimal places. Channel setup Multilevel menus, press the "PROG" key to enter the menu, to modify X Y Z as well as the speed axial parameter. DRO 5 Version 1.0.4 dated 2015-11-19 Original operating instructions Page 21...
- Page 8 Use a resolution of 50 microns for the magnetic tapes with the item no. 3383978 or 3383979 or 3383980 . Other magnetic tapes from other manufacturers, or magnetic tapes with another item number can have a different resolution. DRO 5 Page 22 Original operating instructions...
- Page 9 For technical reasons the strip should be approx. 30mm longer than the actual measuring distance. ATTENTION! For an optimum of adhesion, all anti-adhesive substances (such as oil, grease, dust etc.) must be removed by using residue-free (=evaporating) cleaners. Suitable cleansing agents are e.g.
- Page 10 Img.5-3:. Best protects the assembly in a groove Img.5-4: which should be so deep that the magnetic tape can be completely embedded therein. Img.5-1: Img.5-2: Img.5-3: Img.5-4: DRO 5 Page 24 Original operating instructions Version 1.0.4 dated 2015-11-19...
- Page 11 Sensor must not touch the magnetic strip. active side Img.5-6: Distance sensor / magnetic tape Img.5-7: Max. deviation Img.5-8: Installation of sensor DRO 5 Version 1.0.4 dated 2015-11-19 Original operating instructions Page 25...
- Page 12 Sensor's active side not mounted towards the magnetic strip ( Img.5-8: and Img.5-8:) . Sensor has not been aligned according to Img.5-5: and Img.5-7: DRO 5 Page 26 Original operating instructions Version 1.0.4 dated 2015-11-19...
- Page 13 OPTIMUM M A S C H I N E N - G E R M A N Y Compatibility with other OPTIMUM digital displays Using of your currently installed measuring system on the machine with the digital display DRO5. Display...
- Page 14 M A S C H I N E N - G E R M A N Y 5.11 EC - Declaration of Conformity according EMC Directive 2014/30/EC Optimum Maschinen Germany GmbH The manufacturer / Dr.-Robert-Pfleger-Str. 26 distributor: D - 96103 Hallstadt...
Need help?
Do you have a question about the DRO 5 and is the answer not in the manual?
Questions and answers