Autoplay - LED Strip Studio LEC 3 Manual

Autoplay

These settings allow you to define how the device is working in auto play mode.
• Default file (0-255) – allows you to select which one of the 1 to 255 files will be used
• Speed (0-255) – speed of the default file. 0 = stop, 128 = 100% speed,
• Repeat On/Off – sets repeat of the default file to On or Off.
• Current file (0-255) – allows you to preview some of the files without the need of
In case you change some of the settings, press Save Autoplay Sett. to store the settings.
to play automatically after the device is started. In case it's 0,
no file is played after start (default setting).
255 = 400% speed.
This setting is also used in Art-Net SD-card and DMX SD-card mode.
DMX signal or selecting it manually using LEC3 device buttons.
Don't forget to press Set current file to display the file.
You can also use device buttons to change current file.
37